![]() |
Gerald on his Highball - Photo courtesy of Steve Mclean |
Tombstone; the destination for my first
multi-day group ride and longest single-day ride total. By the time we all met
up there were nine riders, all of us on Victories for the three-day ride –
three Visions, five Cross-countries if we still count Brad Parrack’s beautiful
newly and heavily modified bike, and one High Ball ridden by Brad’s son Gerald.
On the visions we had Kevin Shaw, the ride leader, Steve Mclean Sr., and Jim
Liston. Including Brad and me our Cross riders were Mike Roark, Greg Brown, and
Tim Tarbet. In my mind Gerald had the gutsiest ride of us all with the High
Ball, moderate ape hangers, no windscreen, and no seat back; he rode the crap
out of that bike and reminded me of when my best friend and I took off on our
under powered and under equipped Hondas for 4,000 miles – a CB500 and a
350 Scrambler. Well done young man.
My kick stand was up at 4:27 am, three
minutes early, and I headed east out the 210 to meet Kevin at the Seidners
Collision Center in Duarte. Fortunately this was not a harbinger of things to
come and nobody needed the place other than as a meet point. The Cheshire moon
was low in front of me and had Venus hanging below like a Liz Taylor diamond
gleaming in the predawn sky. The two us jumped right back on the 210 for 13
miles to pick up Steve at a park-and-ride. Still dark out, we rode out to
Moreno Valley and brought the ride number up to seven with Brad, Gerald, Greg,
and Tim.
After we met, re-met, and greeted each
other we geared up swapping out clear eyewear for sunglasses and jumped on
Highway 10 for the first longish, as it turned out, ride segment to gas up 94
miles later at Chiriaco Summit. The sun made its grand entrance and we rode
right into it. For the most part I rode in the middle of the pack with Tim
preferring the sweep position and Kevin in the lead. We had a pretty calm ride
until we hit the San Gorgonio Pass and the big wind farms with the gigantic
turbines stretching along the pass and ridgelines like Indian warriors stretched out
as shown in the old western movies. With the sun rising more white than yellow
making the clouds silver in the celeste-blue sky and us coming up the grade
into it the riders ahead of me were silhouetted in front of the turbines in the
grayscale scene; the only color showing was the red taillights drawing us
onward as we snaked up the grade.
Fueled up, we pushed into Arizona to meet
up with Jim and Mike in Quartzsite. At this point Kevin was taken to task for
being ten minutes late after 234 miles and three meet points. After all, we had
another 100 miles to breakfast in Buckeye and Jim was hungry. To be honest, as
soon as he said it, so was I; I hadn’t given it much thought with all the
excitement of the adventure ahead of me. Considering that we wouldn’t eat lunch a
late proper breakfast, as Dale Moews would describe it, worked just fine. As the rest of the trip unfolded, not
stopping for lunch was the pattern; I felt right as home as that was the way we
worked microwave radio site visits in the middle of nowhere.
The next hop was 150 miles into Tucson
where we stopped at HMD and since I hadn’t taken the time to figure out what
that was I had a nice surprise. HMD, Heavy Metal Desigz is a custom design and fabricator for motorcycles and
specializing in the Victory line. Arlen Ness and HMD are official distributors of each other's parts. This is where Brad got the parts and design
help for his bike. They also do cars and trucks; basically, anything on wheels
they will make look awesome! Mike Saenz is the originator of HMD and he hosted
a tour of the shop; he and the rest of the team are gracious, knowledgeable and
friendly. The current in-shop project is shown here and is similar to Brad’s
black XC, they are both stunning bikes. I highly recommend a visit to the
website at: http://www.hmd520.com/ . Start with HMD if you want to do some great work on your ride.
![]() |
HMD design Victory Cross Country |
![]() |
Close up from HMD Website |
Another 69 miles later and we checked into
the Sagebrush Inn in Tombstone, it was perfect for our group, hitching posts in
front of the rooms for our bikes and everything. I had the Fred McLaury room
having left the Maureen O’Hara suite for Tim. Dinner that night was a 10-block
walk to The Depot Steakhouse & Johnny Ringo’s Bar and since nobody really
noticed my western style riding boots I’d have been better off walking it in my
tennis shoes. Good meal, good friends, and a good day all around.
When all was said and done and all was
seen that I was to see over the 571 miles and 10-block walk the quote of the
day for me was something like this: “Hair? I thought she’d just got out of the
pool and that was a swim cap!”
Ride safe, be well, and keep the iron side
up.
Very good story, i thought she was a swimmer also!
ReplyDeleteThanks for the complement, I appreciate it. I thought she might have been as well, with color combination, perhaps a synchronized swimmer?
DeleteA comment about HMD...more importantly, Arlen Ness is now an official distributor of HMD parts ;)
ReplyDeleteErica, thanks for the updated information. I pulled this from the HMD website and rechecked but didn't find this great news. As soon as you confirm that both Arlen Ness and HMD and distributing each others parts I will happily make the upgrade in my post. Thanks for reading and have a fantastic day.
DeleteAnd that is the way it was! Great account of the weekend start!
ReplyDeleteThanks Mike. Take it easy back in Tucson. Great riding with you...
DeleteThanks, and thanks for putting together the great trip and taking the lead.
ReplyDeleteMy helmet is looking for something to do...
ReplyDelete...we need to do something about that.
Delete